Aurelien Voletta. Garage Door. September 19th, 2017.
There is a wide range as well when it comes to choosing the material of the garage door. You can choose any one from Steel, fiberglass, plain old wood or polyethylene base don your requirements. Steel doors are the strongest and most durable, whereas high density polyethylene doors never dent, rust or fade and do not require to be repainted. Fiberglass doors can also be an option if you want some natural light to pass through as these materials are translucent and also maintenance free. Conventional wooden doors would well fit into your budget and requirements but the low initial cost might be deceiving as the maintenance cost is relatively higher than the other options; wooden doors require regular check ups for warps and rotting.
Sectional Doors: The sectional is made up of numerous separate panels, which are hinged horizontally. They fit to the rear surface of your garage brickwork. When opened, it rises upwards vertically and then backwards into the space of ceiling. Sectional Doors provide better security and protection against weather. Many of them are provided with insulation. These are typically manufactured in steel. Most of these doors can be assembled in 4 hours by a professional as they come in the form of a kit.
You may be used to installing doors in your house, but garage doors, whether they are automatic or manual, are a far more difficult task. Installing a garage could be dangerous as well, so it is strongly suggested to get a professional repairman to do your installation. These professionals will tell you that manual door installation is simpler compared to automatic door installation. It all depends on your preference. If you want heavy garage doors, this would require automatic operations as they would necessitate enormous strength to lift. Manually operated garages are a lot lighter.
In response to the inherently dangerous old style garage spring issues as above, a newer and safer system for opening the overhead garage door was created. The idea was to transfer the load or weight of the door via a cable and pulley system to a vertical rod now equipped with a torsion (twisted) spring. This type of spring is installed with specialty hardware and bolts to a fixed plate at one end, while the entire spring is installed around a horizontal pipe. This load balancing device is normally installed directly over the header of the garage opening. Using appropriate cables, connectors and pulleys, the weight of the garage door is transferred into the torsion spring system. The difference between the old style stretched spring and the newer torsion spring is the way that the spring energy is stored. With the old style stretched spring, the energy is stored and released by pulling on the spring or returning the spring to its un-stretched condition. With a torsion type of spring, the energy is imparted or removed by rotating the spring clockwise or counter clockwise depending upon the direction of usage. With professional installation, the complete loading of the torsion spring is controlled by the garage installer, and is determined by the weight and size of the garage door that it is operating. When this type of torsion spring fails, it remains attached and intact to the location on the horizontal control rod where it was mounted. I have not heard of or seen any torsion spring fly across a garage, creating injury from failed components as with the stretched older style garage door springs. This is not to say that injuries have not occurred with the torsion style spring. The installation of this type of spring is generally safe when left to a trained garage door installation professional. Severe and serious injuries have occurred when untrained, unqualified individuals have attempted to install or service this type of spring. In most installations, a warning tag is left attached adjacent to the torsion spring when the garage door is installed. This tag warns of the danger associated with the stored energy of this spring, and alerts untrained individuals to not attempt any repair, adjustment or to even touch the spring and associated hardware. When the label that should be attached to this spring becomes damaged, is removed or tampered with, it is important that a new warning label be reattached immediately to show the dangers of this spring tension
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does coirlogs.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.